-
0voteA:
Here are the steps to replacing a defective Relay & Overload Assembly on a Drinking Fountain:
1) Remove the screws at the bottom of the fountain and remove the wrapper panel.
2) Unplug the Drinking Fountain from the wall outlet.
3) Locate the Plastic Cover on the side of the Compressor that hides the Relay & Overload.
4) Remove the Relay Cover by pressing down the Slot at the top of the cover using a straight blade screwdriver.
5) Remove the Relay first, then the Overload. They will simply pull off of the Compressor like a plugin.
6) Plugin the Overload, followed by the Relay and Snap the Cover back onto the Compressor. The Relay will be secure after you hear two clicks.
7) Plug the Drinking Fountain back into the wall outlet and secure the wrapper panel back onto the fountain.
If you have any other questions our experts are here to help! Call or text 800-518-5388
Posted by Kully Supply on Tuesday, September 12, 2017